Next Previous Contents

10. Enterprise Linux Networking

In certain situations it is necessary for the networking infrastructure to have proper mechanisms to guarantee network availability near 100% of the time. Some related techniques are described in the following sections. Most of the following material can be found at Linas excellent website: http://linas.org/linux/index.html and in the Linux High-Availability how-to

10.1 High Availability

Redundancy is used to prevent the overall IT system from having single points of failure. A server with only one network card or a single SCSI disk has two single points of failure. The objective is to mask unplanned outages from users in a manner to let users continue to work quickly. High availability software are a set of scripts and tools that automatically monitor and detect failures, taking the appropriate steps to restore normal operation and to notifying system administrators.

10.2 RAID

RAID, short for Redundant Array of Inexpensive Disks, is a method whereby information is spread across several disks, using techniques such as disk striping (RAID Level 0) and disk mirroring (RAID level 1) to achieve redundancy, lower latency and/or higher bandwidth for reading and/or writing, and recoverability from hard-disk crashes. Over six different types of RAID configurations have been defined.There are three types of RAID solution options available to Linux users: software RAID, outboard DASD boxes, and RAID disk controllers.

Related How-tos:

RAID at linas.org:

10.3 Redundant networking

IP Address Takeover (IPAT). When a network adapter card fails, its IP address should be taken by a working network card in the same node or in another node. MAC Address Takeover: when an IP takeover occurs, it should be made sure that all the nodes in the network update their ARP caches (the mapping between IP and MAC addresses).

See the High-Availability How-To for more details: http://sunsite.unc.edu/pub/Linux/ALPHA/linux-ha/High-Availability-HOWTO.html


Next Previous Contents